| System
1000 is a system of industrial doors that has been specifically
designed to cope with specifications for durability,
tightness, operational reliability and minimum maintenance
requirements of heavy industry.
System
1000 is also available in an extra corrosion-proof model
for extremely corrosive environments.
System
1000 may be mounted on the inside or outside of a building,
or in the actual door opening.
System
1000 is available for delivery with optional side jambs
if the existing mounting surface is not suitable for
the side guides. The machine box and motor can be enclosed
in various ways.
PERFORMANCE
Opening speed: 7 to 11 inches / second.
Size
range: Max. Clearance Width (CW) of 48 feet. Max.
Clearance Height (CH) of 52 feet.
Note - Megadoor System 800 is normally recommended
for openings smaller than 26 feet X 26 feet, i.e. CW
x CH.
Wind Load: Standard 20psf, can however be designed
for higher wind loads on request.
ELECTRICAL
SYSTEM
Power Supply: 3-phase 208, 230, 460, 575 Volt;
60 hertz.
Control Voltage: 110 VAC.
Motor Ratings: 2 to 5 Hp. per motor. Doors are supplied
in either single or dual motor versions. The dual motor
system is supplied for doors with CH > 30 feet.
FABRIC
DATA
Unchanged Pliability: -31°F to +158°F.
Tensile Strength: 250 pounds / inch width.
Resistance to Light: 6 - 8 (8 denotes the highest
value in the scale).
Resistance to UV-rays: UV-stabilized.
Fire
Rating: Self-extinguishing, 0 - 25 Flame Spread.
SURFACE
TREATMENT
Steel Parts: Alkaline cleaned or sandblasted.
Powder epoxy finish paint
Sheet
Profiles: Hot-galvanized steel sheet with primer
and finish paint.
Bottom
Profile: Sandblasted and primed.
Side Jambs (frame): Sandblasted and primed.
Other Parts: Aluminum, High Density Plastic, Stainless
Steel, Zinc / Cadmium plated.
|
